Coolant Fed Feeding
 |
 325mm Coolant Fed Feeding Straight shank Drill bit  US $22.50
|
 25 64 Carbide Gun Drill Fed coolant Feeding Bit 388 US $19.95
|
 15 16 Step Pilot Drill bit Fed Coolant Feeding LONG US $19.50
|
 7 64 Carbide Gun Drill Fed coolant Feeding Bit 114 US $13.50
|
 LEFT HAND Spade Drill Bit Coolant fed feeding 1 7 8 US $12.50
|
 29 32 Coolant Fed Feeding Drill bit 9 Long USA Cleve US $11.50
|
Could you supplement your vehicle with Home Brew ?
Now I don't mean illegal stills popping up everywhere with people drinking the alcohol! - I mean If everyone fed their vegetable waste through a shredder - then into a fermentation tank with enzymes and a high yield yeast, then just take out tank in a few weeks and connect into your car. You could then pump it through a very small heater unit - that will boil off the alcohol vapour in a continuous process using engine coolant at 90 degrees centrigrade. The resultant vapour would feed into the air inlet manifold - reducing the overall fuel load.
At the end of the trip, the tank could be taken back inside the house - still giving off heat untill cool - thus conserving more energy in the home - a giant hot watter bottle.
When cool, could be emptied onto a compost heap - with all the plant sugars effectively used.
Yes you can build a still as long as you mix gasoline in it to make it undrinkable.
How to Check & Refill Engine Coolant : How to Flush an Engine Cooling System
You can follow any responses to this entry through the RSS 2.0 feed. Both comments and pings are currently closed.
Comments are closed.